SD007-PFX BPChecker3000 V1/V2
Before starting the downloading...
Carefully read this License Agreement before starting the downloading procedures. This software shall be supplied and provided at free of charge under the terms and conditions of this Agreement. By downloading this software, it is considered that you have accepted and agreed to be bound by the terms of this Agreement. If you do not agree to the terms and conditions of this Agreement, you are not authorized to download this software.
Update Module for BPChecker3000 (V1/V2)This file is the latest updater of "BPChecker3000" for PFX2512/PFX2532. If you currently use the Ver 1, and to use the OP03-PFX, you will need to apply this update.
Also, if you want to install this module , the product version "BPChecker3000" must have already been installed, in addition, you will need to update the firmware of PFX2512/PFX2532. Please refer to BPC3000V2UpdateGuide_E.pdf for details .
Caution: Please read before updating.
The following notes apply if you are updating Ver 1 to Ver 2.
- When you're using Ver18.104.22.168-Ver22.214.171.124, this update is applied. For a custom-made product, Ver126.96.36.199.-Ver188.8.131.52 can't use this update.
- As a result of functional additions in Ver 2, the test condition file was changed from the data format used in Ver 1. When a test condition file created with Ver 1 is opened with Ver 2, the data is automatically updated for Ver 2. As such, new test conditions created with Ver 2 and test conditions created with Ver 1 that have been opened and saved with Ver 2 cannot be used with Ver 1. We recommend that you back up test conditions created with Ver 1 in a separate folder or the like.
- Ver 2 is designed so that test conditions acquired with Ver 1 can be viewed with Graphviewer of Ver 2, but problems may occur depending on the content of test data, the PC performance, and so on. If a problem occurs such as not being able to open test conditions of Ver 1 after updating to Ver 2, it is possible to revert temporarily to Ver 1. See BPC3000V2UpdateGuide_E.pdf.
- Ver 2 does not support Windows XP or Windows 10.
- The software environmental settings (graph axis, color, etc.) are passed on from Ver 1, but some settings may be reset to default values.
|Ver.||2.0.3.00 [Release Note]|
Windows 7 (x86/x64)
Windows 8 (x86/x64)
|Notes||When using GPIB-connected temperature chambers on Win 7/8 x64 environment, 64bit versions of GPIB driver and VISA library are required.|
[Note] This file is the latest (last) updater of "BPChecker3000 Ver1" for PFX2512. If you use the Ver 1, please apply this updater. And you need to version down from Ver 2 to Ver 1, please refer to BPC3000V2UpdateGuide_E.pdf.
WinXP (x86, SP2 or later)
|Notes||When using GPIB-connected temperature chambers on Win Vista/7/8 x64 environment, 64bit versions of GPIB driver and VISA library are required.|