Products

PAD-LA Series

DC Power Supply (Series regulated system, CV/CC) : 9 Models



Outline

The PAD-LA Series are renewal version of our long seller models "PAD-L Series" as known for high performance and high reliability of variable DC regulated power supplies used with excellent regulators. The PAD-LA Series has polished features and performance also it has improved the "easy to use" operation by adopting an advanced design and we aim to establish the "New Basic Power Supply" which can be used in all fields of application from the R&D , Quality Control to the Manufacturing site.

Features

  • Use large LED monitor with high visibility for 4digits display
  • Output and Set Switch
  • Putting together of the mode setting switches
  • OCP (Over Current Protection circuit)
  • Output Monitoring
  • Control Terminals

Lineup

Model Specification
PAD16-100LA Manual... 0 to 16V/0 to 100A
PAD36-60LA Manual... 0 to 36V/0 to 60A
PAD36-100LA Manual... 0 to 36V/0 to 100A
PAD60-60LA Manual... 0 to 60V/0 to 60A
PAD72-30LA Manual... 0 to 72V/0 to 30A
PAD110-20LA Manual... 0 to 110V/0 to 20A
PAD110-32LA Manual... 0 to 110V/0 to 32A
PAD250-8LA Manual... 0 to 250V/0 to 8A
PAD250-15LA Manual... 0 to 250V/0 to 15A
 

Options (Related products)

PIA4810
PIA4810
Power Supplies Controller
The power supply controller capable of analog and digital control. It is equipped with the GPIB and RS-232C interfaces and 4 slots, which allow 4 each of PIA4800 Series-specific control boards to be installed. A control board is capable of analog control of 2 channels of DC power supplies or electronic loads; a total of 8 channels can be controlled

PIA4820
PIA4820
Power Supplies Controller
The expansion unit that can be connected to the PIA4810 or PIA4830 via a TP-BUS to provide additional control channels. In the same way as the PIA4810, it allows a maximum of 4 control boards to be installed.

PIA4850
PIA4850
Power Supplies Controller
The power supply controller only for digital control. It is equipped with the USB interface. And it is capable of digitally controlling of Kikusui PWR, PAS, PAM and PMR Series DC power supplies via the TP-BUS.

TU02-PIA
TU02-PIA
Option(s) for Power Supplies Controller
Terminal Unit for PAN-A series



OP01-PIA
OP01-PIA
Option(s) for Power Supplies Controller
The control board designed exclusively for the PIA4810 and PIA4820. A single control board is capable of analog control of 2 channels of DC power supplies or electronic loads. The OP01-PIA is a full-control board with voltage and current setting and read-back functions,

KRB5-PAD
Bracket
Bracket (Inch size) for PAD-LA(type III)

KRB250-PAD
Bracket
Bracket (Metric size) for PAD-LA(type III)

KRB11-PAD
Bracket
Bracket (Inch size) for PAD-LA(type IV), support rail (one pair) attached

KRB500-PAD
Bracket
Bracket (Metric size) for PAD-LA(type IV), support rail (one pair) attached