Products

PAD-L/LP Series

DC Power Supply (Series regulated system, CV/CC) : 4 Models



Outline

The PAD-L Series, high performance and high reliability, is variable DC regulated power supply used in all fields, from research and development and quality control to manufacturing plants.This Series is made up of two excellent regulators: thyristor preregulator and power transistor Series regulator. Therefore, it combines the high level of performance featured by the Series input type with the low power supply harmonic distortion and efficient output characteristic featured by choke input phase control. The “LP“ Series is also available which is provided with high speed OVP function and various status signals suitable for system use.

Features

  • Improved power factor at low output voltages
  • Low AC input voltage waveform distortion
  • Excellent temperature coefficient
  • Fast transient response
  • Low ripple noise voltage
  • Various safety functions

Lineup

Model Specification
PAD35-200L Manual... 0 to 35V/0 to 200A
PAD35-300LPT Manual... 0 to 35V/0 to 300A, AC 3 Phase input
PAD60-120L Manual... 0 to 60V/0 to 120A
PAD110-60L Manual... 0 to 110V/0 to 60A
 

Options (Related products)

PIA4810
PIA4810
Power Supplies Controller
The power supply controller capable of analog and digital control. It is equipped with the GPIB and RS-232C interfaces and 4 slots, which allow 4 each of PIA4800 Series-specific control boards to be installed. A control board is capable of analog control of 2 channels of DC power supplies or electronic loads; a total of 8 channels can be controlled

PIA4820
PIA4820
Power Supplies Controller
The expansion unit that can be connected to the PIA4810 or PIA4830 via a TP-BUS to provide additional control channels. In the same way as the PIA4810, it allows a maximum of 4 control boards to be installed.

PIA4850
PIA4850
Power Supplies Controller
The power supply controller only for digital control. It is equipped with the USB interface. And it is capable of digitally controlling of Kikusui PWR, PAS, PAM and PMR Series DC power supplies via the TP-BUS.

TU01-PIA
TU01-PIA
Option(s) for Power Supplies Controller
Terminal Unit for PAD-L series *PAD600-1.5L is excluded



OP01-PIA
OP01-PIA
Option(s) for Power Supplies Controller
The control board designed exclusively for the PIA4810 and PIA4820. A single control board is capable of analog control of 2 channels of DC power supplies or electronic loads. The OP01-PIA is a full-control board with voltage and current setting and read-back functions,

OP02-PIA
OP02-PIA
Option(s) for Power Supplies Controller
The control board designed exclusively for the PIA4810 and PIA4820. A single control board is capable of analog control of 2 channels of DC power supplies or electronic loads. The OP02-PIA has only the voltage and current setting feature.

OP-2
OP-2
Option(s) for PAD-L/LP series
External Output Voltage Selector



BH4
Bracket
Bracket (Inch size), Height: 4 pitch

BH4M
Bracket
Bracket (Metric size) , Height: 4 pitch