PLZ-3WH Series

Lineup

Options
(Related products)

Data sheet
Note:To view the PDF file, please use Adobe Reader Ver.6 or later.

Instruments Drivers

Operation Manuals
To download operation manuals (PDF), please use "Operation Manual Database".

PRODUCTS

PLZ-3WH Series
DC Electronic Load (CC/CV/CR/CP)




Outline

The PLZ-3WH Series are composed of system electronic loads used either in characteristic or lifetime tests of a variety of DC voltage sources such as switching power supplies and primary and secondary batteries, or as burn in loads. Instruments in the PLZ Series have four operation modes: “constant current“, “constant resistance“, “constant voltage“, and “constant power“. They are also available in four different power ratings, 150 W, 300 W, 600 W, and 1000 W, with a total of eight models available overall. Incorporating a high-performance current control circuit, all instruments provide highly stable, high-speed operation and offer improved operability and multi-functionality through the use of CPU control. These features allow them to simulate actual load tests of power supply units having large transitional changes in their output currents, such as printers and motors. In the constant power mode, these instruments deliver performance in carrying out load tests on alkaline and other types of batteries. Furthermore, PLZ-3WH Series accept DC input voltages of up to 500 V, making it ready for use at high voltages. And when an optional GPIB or RS-232C interface is employed, these instruments can be operated by fully programmable control. In particular, take advantage of a Kikusui-designed multi-channel bus (MCB) to simultaneously control a maximum of 16 instruments per GPIB address or RS-232C port.

Features

  • Constant power mode useful for battery discharge tests
  • Setting of various conditions Variable rise/fall time function
  • Sequence function that allows complicated current simulations
  • Setup function and backup memories
  • Remote sensing that compensates precisely for set values
  • Trigger signal output useful for waveform monitoring
  • Three-memory function and switching function
  • Soft-start function that suppresses output voltage distortion
  • Short-circuit function that allows instantaneous setting of the maximum current
  • Parallel operations that offer increased current and power capacities

Lineup

Model Specification
PLZ1003WH Scheduled to be discontinued.
For the availability, please check with us.
DC Electronic Load (E-Load), Maximum input voltage of 500V, 50A, 1000W , Capable of doing actual-load simulations under sequence control
> Manual...

Options (Related products)

RC02-PLZ
 RC02-PLZ
Option(s) for PLZ-3W/3WH series
Remote Controller for PLZ-3W/3WH

MC11S
 MC11S
Option(s) for PAX, PBX, PCR-3W/3WH
MCB Interface Board, Applicable series: PAX, PBX, PLZ-3W/3WH

IB11
 IB11
Option(s) for PAX, PBX, PLZ-3W/3WH, PCR-W/W2
GPIB Interface Board, Applicable series: PAX, PBX, PCR-W/W2, PLZ-3W/3WH

RS11
 RS11
Option(s) for PAX, PBX, PLZ-3W/3WH, PCR-W/W2
RS-232C Interface Board, Applicable series: PAX, PBX, PCR-W/W2, PLZ-3W/3WH

PC01-PLZ-3W
 PC01-PLZ-3W
Option(s) for PLZ-3W/3WH series
Parallel operation cable

408J-101
 408J-101
GPIB cable
GPIB cable, length: 1m

408J-102
 408J-102
GPIB cable
GPIB cable, length: 2m

408J-104
 408J-104
GPIB cable
GPIB cable, length: 4m

KRA3
Rack Adapter
Rack adapter (Inch size) *Applicable series name: PWR, PAS, PMR, PMP, PAK-A, PMC, PMC-A, PCR500M, PLZ-4W/4WL/4WH, PLZ-3W/3WH, PIA4800 More...

KRA150
Rack Adapter
Rack adapter (Metric size) *Applicable series name: PWR, PAS, PMR, PMP, PAK-A, PMC, PMC-A, PCR500M, PLZ-4W/4WL/4WH, PLZ-3W/3WH, PIA4800 More...

KBP3-2
Blank Panel
Blank panel for KRA3 or150, width:1/2

KBP3-3
Blank Panel
Blank panel for KRA3 or150, width:1/3

KRB3
Bracket
Bracket (Inch size) More...

KRB150
Bracket
Bracket (Metric size) More...