Products

PIA4800 Series

Power Supply Controller Supporting Multiple Channels : 5 Models



Outline

The PIA4810 is a power supply controller capable of analog and digital control. It is equipped with the GPIB and RS-232C interfaces and 4 slots, which allow 4 each of PIA4800 Series-specific control boards to be installed. A control board is capable of analog control of 2 channels of DC power supplies or electronic loads; a total of 8 channels can be controlled.
Moreover, DC power supplies with a digital remote-control function, such as the Kikusui PAS, PAM(*1) and PMR Series, can be directly connected to the PIA4830 via a TP-BUS (twisted pair bus), enabling a system up to 32 channels to be controlled digitally.
PIA4820 is an expansion unit that can be connected to the PIA4810 or PIA4830 via a TP-BUS to provide additional control channels. In the same way as the PIA4810, it allows a maximum of 4 control boards to be installed.
Then it is possible to use up to 3 units of PIA4820 as an expansion that can be connected to the PIA4810 via the TP-BUS, the system is capable of controlling a maximum of 32 channels. Moreover, the combined use of the GPIB and TP-BUS allows the system to control a maximum of 448 channels.
PIA4830 is a power supply controller only for digital control. It is capable of digitally controlling a system up to 32 channels of such Kikusui PAS, PAM(*1) and PMR Series DC power supplies via the TP-BUS.
OP01-PIA and OP02-PIA are control boards designed exclusively for the PIA4810 and PIA4820. A single control board is capable of analog control of 2 channels of DC power supplies or electronic loads. The OP01-PIA is a full-control board with voltage and current setting and read-back functions, while the OP02-PIA4800 has only the voltage and current setting feature.
(*1) The TP-BUS interface option is factory installed option, this option should be indicated when ordering.

Lineup

Model Specification
PIA4810 Photo
Manual...
The power supply controller capable of analog and digital control. It is equipped with the GPIB and RS-232C interfaces and 4 slots, which allow 4 each of PIA4800 Series-specific control boards to be installed. A control board is capable of analog control of 2 channels of DC power supplies or electronic loads; a total of 8 channels can be controlled
PIA4820 Photo
Manual...
The expansion unit that can be connected to the PIA4810 or PIA4830 via a TP-BUS to provide additional control channels. In the same way as the PIA4810, it allows a maximum of 4 control boards to be installed.
PIA4830 Photo
Manual...
The power supply controller only for digital control. It is equipped with the GPIB and RS-232C interfaces. And it is capable of digitally controlling of Kikusui PWR, PAS, PAM and PMR Series DC power supplies via the TP-BUS.
OP01-PIA Photo
Manual...
The control board designed exclusively for the PIA4810 and PIA4820. A single control board is capable of analog control of 2 channels of DC power supplies or electronic loads. The OP01-PIA is a full-control board with voltage and current setting and read-back functions,
OP02-PIA Photo
Manual...
The control board designed exclusively for the PIA4810 and PIA4820. A single control board is capable of analog control of 2 channels of DC power supplies or electronic loads. The OP02-PIA has only the voltage and current setting feature.
 

Options (Related products)

Wavy for PAS&PWR
Wavy for PAS&PWR
Sequence Creation Software
Sequence Creation Software for Wavy for PAS Series or PWR Series (via PIA4830/4850)

TU01-PIA
TU01-PIA
Option(s) for Power Supplies Controller
Terminal Unit for PAD-L series *PAD600-1.5L is excluded



TU02-PIA
TU02-PIA
Option(s) for Power Supplies Controller
Terminal Unit for PAN-A series



SC01-10
SC01-10
Option(s) for Power Supplies Controller
Shielded 26P Flat Cable, 1m length



SC01-20
SC01-20
Option(s) for Power Supplies Controller
Shielded 26P Flat Cable, 2m length



SC03-PIA
SC03-PIA
Option(s) for Power Supplies Controller
2-core shielded cable for connecting OP01-PIA control board with PMC-A series DC power supplies. (J2 connector: 14-pins)



SC04-PIA
SC04-PIA
Option(s) for Power Supplies Controller
2-core shielded cable for connecting OP02-PIA control board with PMC-A series DC power supplies .



SC05-PIA
SC05-PIA
Option(s) for Power Supplies Controller
2-core shielded cable for connecting OP01-PIA control board with PMC-A series DC power supplies . (J2 connector: 26-pins)



IF01-PAK-A
IF01-PAK-A
Option(s) for Power Supplies Controller
Interface card for PAK-A series (Factory option)



408J-101
408J-101
GPIB cable
GPIB cable, length: 1m



408J-102
408J-102
GPIB cable
GPIB cable, length: 2m



408J-104
408J-104
GPIB cable
GPIB cable, length: 4m



KRA3
Rack Adapter
Rack adapter (Inch size) *Applicable series name: PWR(01), PAS, PMR, PMP, PAK-A, PMC, PMC-A, PMX-A,PCR500M, PLZ-205/405W, PLZ-4W/4WL/4WH, PLZ-3W/3WH, PIA4800

KRA150
Rack Adapter
Rack adapter (Metric size) *Applicable series name: PWR(01), PAS, PMR, PMP, PAK-A, PMC, PMC-A, PMX-A, PCR500M, PLZ-205/405W, PLZ-4W/4WL/4WH, PLZ-3W/3WH, PIA4800

B2-PIA4810/20
Bracket
Rack mount frame bracket for PIA4810and PIA4820 installed in RMF4 (4M)



KBP3-2
Blank Panel
Blank panel for KRA3 or150, width:1/2



KBP3-3
Blank Panel
Blank panel for KRA3 or150, width:1/3



KBP3-6
Blank Panel
Blank panel for KRA3 or150, width:1/6