Products

TOS5101

[10kV AC/DC] Hipot Tester



Outline

The TOS5101 is designed exclusively for hipot testing of electronic equipment and components conforming to various safety standards. The use of a high luminance, large fluorescent display tube for the display enables data including measured values, status and judgment results to be extremely legible. The Pass/fail function employs a window comparator method that enables TOS5101 to make fail judgment of current leakage over the upper reference value and below the lower reference value which can be set on the front panel.
Thus, highly reliable testing can be performed including that for test lead disconnection and defective contact. In addition, in order to prevent erroneous operation and accidents, the TOS5101 is also equipped with a Key Lock function and Interlock function, a high-voltage output terminal having a narrowed insertion port, a large DANGER lamp, and an automatic discharge function (during DC operation) that removes charge from the test piece. These features give the TOS5101 a high degree of safety and reliability.

Features

  • Complies with various safety standards
  • AC/DC output (0 to 10 kV)
  • Large color display
  • Digital voltmeter and ammeter
  • Digital timer
  • Window comparator type employed for Pass / fail judgement
  • Equipped with remote control function
  • Various signal outputs
  • Automatic discharge function (during DC operation)
  • Provided with zero turn-on switch
  • Compact size

Lineup

Model Specification
TOS5101 Manual... 10kV, 50mA (DC: 5mA), AC/DC test, Digital ammeter, Digital timer, Automatic discharge function (DC)
 

Options (Related products)

RC01-TOS
RC01-TOS
Option(s) for Electrical Safety Testers
Remote control box (For one hand operation, cable length:1.5m) Note1: The optional Adapter DD-5P/6P (DIN to Mini DIN) is required for the connection with TOS7200, Note2: The optional Adapter DD-5P/9P (DIN to Mini DIN) is required for the connection with TOS53XX

RC02-TOS
RC02-TOS
Option(s) for Electrical Safety Testers
Remote control box (For both-hand operation, cable length:1.5m) Note1: The optional Adapter DD-5P/6P (DIN to Mini DIN) is required for the connection with TOS7200, Note2: The optional Adapter DD-5P/9P (DIN to Mini DIN) is required for the connection with TOS53XX

DD-3 5P
DD-3 5P
Option(s) for Electrical Safety Testers
DIN cable for remote control box, cable length:3m



HP01A-TOS
HP01A-TOS
Option(s) for Electrical Safety Testers
High-voltage test probe, Cable Length 1.8m (AC4kV,DC5kV Max.) , Note: The optional Adapter DD-5P/9P (DIN to Mini DIN) is required for the connection with TOS53XX

HP02A-TOS
HP02A-TOS
Option(s) for Electrical Safety Testers
High-voltage test probe, Cable Length 3.5m (AC4kV,DC5kV Max.), Note: The optional Adapter DD-5P/9P (DIN to Mini DIN) is required for the connection with TOS53XX

TL03-TOS
TL03-TOS
Option(s) for Electrical Safety Testers
High-voltage test lead, 1.5m (10kV Max.)

TL04-TOS
TL04-TOS
Option(s) for Electrical Safety Testers
High-voltage test lead, 1.5m(5kV Max.), for TOS1200, RL01-TOS

TL05-TOS
TL05-TOS
Option(s) for Electrical Safety Testers
High-voltage test lead, 1.5m(5kV Max.), for TOS7000 series,149-10A, RL01-TOS

PL01-TOS
PL01-TOS
Option(s) for Electrical Safety Testers
Warning light unit for TOS5000A, TOS8870A

BZ01-TOS
BZ01-TOS
Option(s) for Electrical Safety Testers
Buzzer unit for TOS5000(A) series

RL01-TOS
RL01-TOS
Option(s) for Electrical Safety Testers
Load resistor for calibration of a W. Tester, The value of the resistor are selected to meet UL (UL 1492, UL1409, UL1410) requirements

TOS1200
TOS1200
Option(s) for Electrical Safety Testers
For the availability, please check with us.
Calibrator for the leakage current detecting sensitivity of a W. Tester

149-10A
149-10A
High Voltage Digital Voltmeter (AC/DC)
AC/DC +/-10kV, Used for high voltage: max. 10kV, For DC, AC (50 to 60Hz) voltage, High input impedance: 1000M Ω