PRODUCTS

• The system for charge and discharge testing can be configured with the selected Kikusui's electronic load and the DC power supply.
• The applicable maximum voltage : 60.0000 V
• The applicable maximum current : 50.0000 A
• The operating mode : Charge mode (CC-CV, CC ) / Discharge mode (CC, CP, CC Pulse, CP pulse)
• Equipped with an electric input/output terminal, load switch (route switch circuit)
• Supports temperature measurement
• Equipped with the vibration sensor (auto stop function) .
• Included the application software "BPChecker2000 Basic edition (Up to 2CH)"

The "BPChecker 2000 Basic Edition", a standard accessory, can manage the entire operation from the setting of the test conditions, the execution of the test, and analyzing the test result files. This software can controll the thermostatic chambers (manufactured by ESPEC) and also applies to the synchronized test with the thermostatic chambers.

The recommended operating environment :
CPU: Pentium IV 1GHz or higher / Memory 512 MB or more / Windows 2000 Professional (SP4 + Update Roll up1), Windows XP (SP2 or later with Intel x86) or Windows Vista (Intel x86,x64) / USB interface (GPIB interface is required for controlling the thermostatic chamber)

The figure shows the overlapped graph of charging curve (discharge, charge + discharge ), it is also capable of calculating the average, standard deviation, max or min value, and the data analysis.

The example system configuration consists of the charge/discharge system controller "PFX2511", the DC power supply "PWR800L", and the electronic load "PLZ1004W". The dimention of the system may differ depends on the configuration of the selected models. The PFX2121 (communication control unit) is also required for the control by the PC. (USB connection)
The PFX2511 can be configured with the below specified combination. Each of the system configuration is assigned for the specific model ID, The future combination of model ID shall be assigned by upgrading the application software, please visit our website for the latest information.

Model ID	Power supply for charge	E-load for discharge
5101 (M range)	PWR800L	PLZ1004W
5102 (H range)	PWR800L	PLZ1004W
5103	PWR1600L	PLZ1004W x 2
5104	PWR800L	PLZ334W
5106	PWR1600L	PLZ1004W
5107	PAS10-70	PLZ1004W
5108	PAS20-36	PLZ1004W
5109	PAS20-54	PLZ1004W
5110	PAS40-27	PLZ1004W
5111	PWR800L	PLZ164W

Q: Is it possible to configure the system with the equipment which are currently used?
If the used equipments are complied to the applicable model of the DC power supply and the electronic load, it is possible to configure the system with the PFX2511 to perform charge and discharge test.
* For details of the system configuration, please contact us.

Applicable models
Power Supplies: PWR Series, PAS Series
Electronic loads: PLZ-4W Series

Q: How the adjustment or the calibration can be managed ?
The adjustment is not required when introducing the system. The periodic calibration of the PFX2511 provides securing the traceability of the entire system.