Products

PFX2500 Series

Charge/Discharge System Controller : 4 Models



Outline

PFX2500 Series is a high performance Charge/Discharge system controller that takes measurements in combination with our DC power supply and electronic load in order to evaluate test sample (electric storage elements such as secondary batteries) characteristics. It is also capable to perform evaluation test with high-performance, large capacity and wide range of rating with the combination of DC power supply and electronic load.
Execution of the test is conducted by the exclusive application software. The test corresponds to long time continuous test and synchronization test with temperature chambers with the multiplexed protection performance. In addition, easy data editing is also capable with fulfilling graphic performance.
Spec Comparison
Item PFX2532 PFX2512 PFX2511
Rating 60 V / 200 A 60 V / 50 A
Application software BPChecker3000 BPChecker2000 (free version attached, 2-CH without limitation of function from qualified version)
Communication interface LAN TP-BUS (PFX2121 is required for PC connection)
Monitoring data minimum time interval 0.1 s 1 s (up to 30 channels), 2 s (more than 30 channels)
High speed data sampling Selected form 1 ms/10 ms/100 ms maximum 6000 points for every profile -
Charge/ discharge mode 9 modes
Charging: CC, CC-CV
Discharging: CC, CP,CC-CV, CP-CV
Others: Pattern, I-V, Pause
6 modes
Charging: CC, CC-CV
Discharging: CC, CP, CC-Pulse, CP-Pulse
Test condition configuration Individual Profile Setting (unlimited) for Charging/Discharging, etc Conditional branching function from charge/discharge results is available. Maximum 20 patterns are divided into individual loop setting and total repeat setting with charging and discharging as a pair.
Seamless charge/ discharge Less than 50 ms for transfer time - (Approx. 2 seconds for charge/discharge transfer time: Depending on the number of channels)
Termination condition Temperature condition Fixed time

Features

  • Maximum voltage: 60.0000 V/Maximum current: 50.0000 A (PFX2532: 200.000A)
  • Capable of seamless charging/discharging (high speed charging/discharging transfer control)(2512/2532)
  • Capable of high-precision measurement of cumulative capacities and amount of power as well as voltage and current
  • Pattern charging/discharging capabilities by 10000 steps are installed
  • Supporting temperature measurement and capable of monitoring temperatures during charging/discharging
  • High speed sampling with maximum 1 ms can be realized (2512/2532)
  • A 6 V range is newly installed and is capable of high-precision measurement (2512/2532)
  • Fully equipped with safety features of the overcharge protection using voltage, electric charge and temperature
  • Battery deterioration is prevented by turning off the output after detecting wobbling and shock with vibration sensor
  • LAN as standard equipment (2512/2532)
  • Complicated Systems Integrated into One

    PFX2500 Series has integrated systems into one unit where battery evaluation is required. In addition, the series has high degrees of flexibility corresponding to wide range of rating since it is possible to combine our conventional DC power supply (for charging) and our electronic load (for discharging) tailored to needs. Introduction cost is able to be reduced by selecting equipment which meets charge/discharge test condition required.
  • Corresponding to Specification Test Pattern by Realizing Seamless Charge/Discharge (PFX2512/2532 only)

    A certain time was required for transferring power supply and electronic load in the past. Seamless charge/discharge transfer has been realized at PFX2512/2532 by the simultaneous control of power supply and electronic load. For this reason, correspondence to characteristic test of recapturing complex applications such as application where charge/discharge repeating without taking breath is performed for electric motorcycle and electric assisted bicycle as well as electric vehicle and hybrid vehicle, and application for UPS for peak shift and to specification test pattern where continuous charge/discharge is performed such as IEC62660 became possible.
  • Realized Maximum 1 ms High Speed Data Sampling (PFX2512/2532 only)

    Minimum 1 ms (maximum 6000 points for every profile) voltage/current measurements are capable by assigned voltage and current steps as trigger. This is most suited to impedance analysis of test and evaluation of life determination since high-precision voltage waveform synchronized to step current can be acquired.

    • Sampling rate: selected from 1 ms/10 ms/100 ms
    • Cell voltage meter: fixed at 100 ms of sampling rate (at OP02-PFX installed)
    • 4 types of measurement start triggering (just after charge-discharge start/just before charge-discharge completion)
    • Measurement data memory capacity (128 Mbits):6000 sampling storage: 6 s @1 ms/60 s @10 ms/ 600 s @100 ms

  • System Configuration


  • PFX2512/2352 Exclusive Application Software, BPChecker3000

    The application software, BPChecker3000 (SD007-PFX), equips with the new features of PFX2512/2532 where test condition and graphical drawing function are emphasized on existing BPChecker2000, and it realizes [Seamless Charge/Discharge] and [High Speed Data Sampling]. At the test condition setting, the test condition (project) is created from database compiled charge/discharge condition (profile).
    The test execution shows that graphical display function is emphasized in its extraction and overwriting functions for larger data integration. In addition, synchronized operation with a temperature chambers is capable and the charge/discharge test is comprehensively controlled including temperature control under test environment. Further more, it can be applied to the operation with [CAN Bus] for which demand will be increased accompanied by the technical development of battery management in future.
    [Caution]BPChecker3000 is essential for PFX2512/2532 performance. PFX2512/2532 does not work with BPChecker2000.
  • PFX2511 Exclusive Application Software, BPChecker2000 Basic

    The application software, BPChecker2000, can manage all processes from creating the test condition file to output of the test result file. Setting and execution of conditions for battery charge and discharge characteristics test and an analysis of test results can be performed on the PC. In addition, if the PC is equipped with GPIB communication environment, it can externally control the temperature chambers manufactured by ESPEC, and it allows to synchronize with the temperatures in the chamber.
    * The control of BPChecker2000 Basic supplied with PFX2511 is limited to 2 channels. BPChecker2000 Full Edition with no function limit is sold separately.

Lineup

Model Specification
PFX2511 Manual... PFX2511 is a high performance Charge/Discharge system controller that takes measurements in combination with our DC power supply and electronic load in order to evaluate test sample (electric storage elements such as secondary batteries) characteristics. Maximum voltage: 60.0000 V/Maximum current: 50.0000 A, Capable of high-precision measurement of cumulative capacities and amount of power as well as voltage and current, Pattern charging/discharging capabilities by 1000 steps are installed, Supporting temperature measurement and capable of monitoring temperatures during charging/discharging, Fully equipped with safety features of the overcharge protection using voltage, electric charge and temperature, Battery deterioration is prevented by turning off the output after detecting wobbling and shock with vibration sensor
PFX2512 Manual... PFX2512 is a high performance Charge/Discharge system controller that takes measurements in combination with our DC power supply and electronic load in order to evaluate test sample (electric storage elements such as secondary batteries) characteristics. Maximum voltage: 60.0000 V/Maximum current: 50.0000 A, Capable of seamless charging/discharging (high speed charging/discharging transfer control), Capable of high-precision measurement of cumulative capacities and amount of power as well as voltage and current, Pattern charging/discharging capabilities by 10000 steps are installed, Supporting temperature measurement and capable of monitoring temperatures during charging/discharging, High speed sampling with maximum 1 ms can be realized, A 6 V range is newly installed and is capable of high-precision measurement, Fully equipped with safety features of the overcharge protection using voltage, electric charge and temperature, Battery deterioration is prevented by turning off the output after detecting wobbling and shock with vibration sensor, LAN as standard equipment
PFX2532 Manual... PFX2532 is a high performance Charge/Discharge system controller that takes measurements in combination with our DC power supply and electronic load in order to evaluate test sample (electric storage elements such as secondary batteries) characteristics. Maximum voltage: 60.0000 V/Maximum current: 200.000 A, Capable of seamless charging/discharging (high speed charging/discharging transfer control), Capable of high-precision measurement of cumulative capacities and amount of power as well as voltage and current, Pattern charging/discharging capabilities by 10000 steps are installed, Supporting temperature measurement and capable of monitoring temperatures during charging/discharging, High speed sampling with maximum 1 ms can be realized, A 6 V range is newly installed and is capable of high-precision measurement, Fully equipped with safety features of the overcharge protection using voltage, electric charge and temperature, Battery deterioration is prevented by turning off the output after detecting wobbling and shock with vibration sensor, LAN as standard equipment
PFX2121 Manual... Control unit for PFX2000, PFX2511
 

Options (Related products)

SD002
SD002
Option for PFX2000 Battery Tester System
Application software BPChecker2000 Full Edition (For PFX2000 or PFX2511. The 2-channel version is supplied with PFX2511)

SD007-PFX
SD007-PFX
Option for PFX2500 Charge/Discharge System Controller
Application software “BPChecker3000” (For PFX2512/2532)



OP01-PFX
OP01-PFX
Option(s) for PFX2500 Battery Tester System
Voltage/thermometer unit (For PFX2511. Up to 3 boards can be mounted)



OP02-PFX
OP02-PFX
Option(s) for PFX2500 Battery Tester System
Voltage/thermometer unit (For PFX2512/2532. Up to 3 boards can be mounted)



OP03-PFX
OP03-PFX
Voltmeter Unit (for SL01-PFX)
By installing an Voltmeter Unit OP03-PFX in an option slot on the SL01-PFX, you can increase the number of voltmeter measurement points. If OP03-PFX units are installed in all option slots of the SL01-PFX, voltage measurement points can be expanded to 64 points.



TL08-PFX
TL08-PFX
Load cable
Max.50A ,length:5m Load cable with voltage current, and temperatur sensing cable. (Heat resistant up to 105 °C)



TL09-PFX
TL09-PFX
Lead wire
Voltage lead wire for OP01/02-PFX for 4 cells, K type thermocouple for 4 cells (Heat resistant up to 105 °C)



TL10-PFX
TL10-PFX
Cable set for PFX2532
Rated current: 200 A, DUT cable: Approx. 3 m, DC power supply connection cable: Approx. 60 cm, Electronic load connecion cable: Approx. 60 cm, Voltage sensing cable with the thermistor, CE compliant product, Maximum operating temperature: 75 °C (Connection cable/ DUT cable)



TL11-PFX
TL11-PFX
Sensing cable set (for OP03-PFX)
This product supports eight voltage measurement points. Length: Approx. 5 m, Maximum operating temperature: 105 °C, No-finished end on the side of test materials



TL12-PFX
TL12-PFX
Sensing cable set (for OP03-PFX) *CE Marked
This product supports eight voltage measurement points. Length: Approx. 3 m, Maximum operating temperature: 105 °C, No-finished end on the side of test materials, CE compliant product



SL01-PFX
SL01-PFX
8Slot Unit (for PFX2512/2532)
The 8Slot Unit SL01-PFX is connected to the PFX2512/2532 Charge/Discharge System Controller to expand the voltage measurement points. For this connection, an EX01-PFX connection board is installed into the PFX2512/2532. It enables highly accurate evaluation of cell voltage disparity measurements, which is indispensable for evaluation testing of large capacity battery modules. If Voltmeter Units OP03-PFX are installed in all SL01-PFX slots, voltage measurement points can be expanded to 64 points. Further, by installing Volt/Thermometer Units OP02-PFX in the PFX2512/2532, you can increase the number of measurement points to 72.



PWR400L
PWR400L
PWR series DC Power Supplies
400W, 0 to 80V/0 to 25A(40A)

PWR800L
PWR800L
PWR series DC Power Supplies
800W, 0 to 80V/0 to 50A(80A)

PWR1600L
PWR1600L
PWR series DC Power Supplies
1600W, 0 to 80V/0 to 100A(160A)

PAT40-200T
PAT40-200T
PAT series DC Power Supplies
8kW, 0 to 40V/0 to 200A

PAT60-133T
PAT60-133T
PAT series DC Power Supplies
8kW, 0 to 60V/0 to 133A

PLZ164W
PLZ164W
PLZ-4W series Electronic Load
DC Electronic Load (E-Load), 1.5 to 150V, 33A, 165W , Rise time: 10 µ second(which converts to rise and fall times) high-speed response, Possible to perform actual Load simulation by sequence control function, Equipped with USB (Supplied as standard)

PLZ164WA
PLZ164WA
PLZ-4W series DC Electronic Load
DC Electronic Load (E-Load), 0 to 150V, 33A, 165W , Rise time: 10 µs (which converts to rise and fall times) high-speed response, Possible to perform actual Load simulation by sequence control function, Equipped with USB (Supplied as standard)

PLZ334W
PLZ334W
PLZ-4W series DC Electronic Load
DC Electronic Load (E-Load), 1.5 to 150V, 66A, 330W , Rise time: 10 µ s (which converts to rise and fall times) high-speed response, Possible to perform actual Load simulation by sequence control function, Equipped with USB (Supplied as standard)

PLZ664WA
PLZ664WA
PLZ-4W series DC Electronic Load
DC Electronic Load (E-Load), 0 to 150V, 132A, 660W , Rise time: 10 µ s (which converts to rise and fall times) high-speed response, Possible to perform actual Load simulation by sequence control function, Equipped with USB (Supplied as standard)

PLZ1004W
PLZ1004W
PLZ-4W series DC Electronic Load
DC Electronic Load (E-Load), 1.5 to 150V, 200A, 1000W , Rise time: 10 µs (which converts to rise and fall times) high-speed response, Possible to perform actual Load simulation by sequence control function, Equipped with USB (Supplied as standard)

PLZ2004WB
PLZ2004WB
Option for PLZ-4W series DC Electronic Load
2000W booster unit for model PLZ1004W dc electronic load (E-Load). Using 1 PLZ1004W as a master unit, a maximum of 4 booster units can be parallel connected. (Max. 9kW, 1800A) *PLZ2004WB can be used for the PLZ1004W only. It cannot be connected and used with any other model.