Products

KRO

19 inch Rack (Open type) : 3 Models



Outline

The KRO Series are designed in accordance with both JIS Standards and EIA Standards. Since these racks are equipped with support angle as standard, even heavy products can be mounted. (With products weighing more than 70kg, use a rack with brackets.)
The KRO Series conforms both JIS and EIA standards simply replacing the front panel with the rear panel. Various Kikusui products can be easily mounted in a rack by using a bracket and rack mount frame, rack adaptor, etc. JIS standards (millimeter size) and EIA standards (inch size) racks are available. Brackets and rack mount frames, rack adaptors, etc. applicable to each type are also available.
Since the width of one panel is 50mm for JIS Standards and 44.45mm for EIA Standards, the bracket and rack mount frame, etc. of the panel width matched to the product body are selected based on one panel width.
When using brackets to install models liable to give off heat, it is necessary to provide at least the minimum number of blank panels required for each model. Plate-type panels and mesh-type blank panels are also available.

Lineup

Model Specification
KRO900 Manual... 19" Rack, Height: 900mm
KRO1250 Manual... 19" Rack, Height: 1470mm
KRO1600 Manual... 19" Rack, Height: 1825mm
 

Options (Related products)

BP191
Blank Panel
Blank panel (Inch size), Height: 1 pitch



BP191-M
Blank Panel
Blank panel-mesh (Inch size), Height: 1 pitch



BP191A-M
Blank Panel
Blank panel-mesh (Inch size), Height: 1 pitch, for PAN-A series type II



BP1H
Blank Panel
Blank panel (Metric size), Height: 1 pitch



BP1H-M
Blank Panel
Blank panel-mesh (Metric size), Height: 1 pitch



BP2H
Blank Panel
Blank panel (Metric size), Height: 2 pitch



BP2H-M
Blank Panel
Blank panel-mesh (Metric size), Height: 2 pitch