Configures the KFM2150 system.
Reads the oldest error information from the error queue. The error queue can store up to 255 errors.
Returns the oldest error in the error queue in response to SYST:ERR? as follows:
(Example) When there are no errors or events
Returns 0, "No error".
(Example) When a command that cannot be executed in the current operating condition is received
Returns -221, "Settings conflict".
SYST:LOC (RS232C and USB only)
Sets the KFM2150 operation to panel operation (local). This is a substitute command for the IEEE488.1 gtl message (Go To Local).
SYST:REM (RS232C and USB only)
Sets the KFM2150 operation to remote mode. All panel keys except the LOCAL key are locked. This is a substitute command for the IEEE488.1 REN message (Remote Enable) and address designation.
Omitting the parameter is equivalent to ON (1).
The power-on default is ON for the RS232C and OFF for the USB.
SYST:RWL (RS232C and USB only)
Sets the KFM2150 operation to remote mode. All panel keys are locked (LOCAL key is also locked). This is a substitute command for the IEEE488.1 llo message (Local Lock Out).
Queries the version of the SCPI specifications to which the KFM2150 conforms.
Returns SCPI 1999.0 in response to SYST:VERS?.
SYST:COMM:SER:PACE (RS232C only)
Sets the flow control condition of the KFM2150 serial (RS232C) interface.
|ACK||Control using the acknowledge function|
Returns the flow control condition in response to SYST:COMM:SER:PACE?.