RMT CONT SOFTWARE FOR PCR-LE SD021-PCR-LE

Operation Guide


Setting the Voltage

Under Voltage, set the voltage.

1616.jpg

1

To specify a line voltage, tap Line. To specify a phase voltage, tap Phase.

2

Tap Nominal Set.

A numeric keypad appears.

3

Enter the appropriate voltage (nominal value), and tap Set.

The PCR-LE/PCR-LE2 voltage setting will be changed. The resolution is 0.1 V.

Increasing or decreasing in steps

1

Under Step, tap 1V or 0.1V.

2

To increase the voltage by the specified step value, tap ▲. To decrease, tap ▼.

The PCR-LE/PCR-LE2 voltage setting will change by the step value set in step 1.

Changing the voltage setting (nominal value) by 10 %

Tap -10% to set the PCR-LE/PCR-LE2 voltage to -10% of the nominal value.

Tap +10 % to set the PCR-LE/PCR-LE2 voltage to +10% of the nominal value.

Tap 0% to return the PCR-LE/PCR-LE2 voltage to the nominal value.

Tapping -10% or +10% does not change the nominal value. Only the PCR-LE/PCR-LE2 voltage setting will be changed.

SD021-PCR-LERMT CONT SOFTWARE FOR PCR-LE SD021-PCR-LE
Operation Guide