RMT CONT SOFTWARE FOR PCR-LE SD021-PCR-LE

Operation Guide


Installation

You need to log on as an administrator to install the software.

Exit all software applications that are running. If antivirus software is running, the installation may not be performed correctly. Turn off antivirus software while the installation is being performed. After the installation is complete, turn the antivirus software back on.

Installing the VISA library

VISA (Virtual Instrument Software Architecture) was developed by the IVI Foundation. It is the standard specification for measurement instrument connection software.

A VISA library must be installed in the tablet PC. You need one of the following VISA libraries.

NI-VISA by National Instruments Corporation (Ver. 4.0 or later)

Agilent VISA by Agilent Technologies (Agilent IO Libraries Suite 14.2 or later)

KI-VISA Ver5.1.0 or later

Installing KI-VISA

- Note -

Do not install multiple VISA libraries on the same tablet PC. Doing so may cause errors. If NI-VISA or Agilent VISA is already installed on your PC, you do not need to install KI-VISA.

KI-VISA is an original VISA library developed by Kikusui Electronics Corporation that supports the VXIplug&play VISA 3.0 specifications. You can download the most recent version of this library from the Kikusui Electronics Corporation website (http://www.kikusui.co.jp/en/download/).

1

Insert the supplied USB memory device into your tablet PC.

2

Double-tap Kivisa_x_x_x.exe in the USB memory device.

The value for x varies depending on the revision of the VISA library stored on the USB memory device.

3

Proceed with the installation according to the instructions on the screen.

Installation (continued)

Installing SD021-PCR-LE

1

Insert the supplied USB memory device into your tablet PC.

2

Double-tap setup.exe in the USB memory device.

3

Proceed with the installation according to the instructions on the screen.

4

In the Apps view of the Start screen, press and hold SD021-PCR-LE, and select Pin to Start.

Uninstalling SD021-PCR-LE

1

Press and hold the SD021-PCR-LE tile on the Start screen.

2

Tap Uninstall.

The Programs and Feature window appears.

3

From the list, select “Kikusui SD021-PCR-LE RMT CONT SOFTWARE” to delete it.

SD021-PCR-LERMT CONT SOFTWARE FOR PCR-LE SD021-PCR-LE
Operation Guide