PLZ-5W Series Electronic Load

Commnunication Interface Mannual


 

Command (function search)

Setting the Protection Function and Clearing the Alarm

Overcurrent protection (OCP)

CURR:PROT Sets the current in OCP
CURR:PROT:STAT Sets the operation of the PLZ-5W when OCP is activated

Overpower protection (OPP)

POW:PROT Sets the power in OPP
POW:PROT:STAT Sets the operation of the PLZ-5W when OPP is activated

Undervoltage protection (UVP)

VOLT:PROT:LOW Sets the voltage of UVP
VOLT:PROT:STAT Enables/disables UVP

Overcurrent protection (OCP) during program operation

PROG:CURR:PROT Sets the current value of OCP for program operation
PROG:CURR:PROT:STAT Sets how the PLZ-5W operates when OCP is activated during program operation

Overpower protection (OPP) during program operation

PROG:POW:PROT Sets the power value of OPP for program operation
PROG:POW:PROT:STAT Sets how the PLZ-5W operates when OPP is activated during program operation

Undervoltage protection (UVP) for program operation

PROG:VOLT:PROT:LOW Sets the voltage value of UVP for program operation
PROG:VOLT:PROT:STAT Enables or disables UVP for program operation

Clears alarms

INP:PROT:CLE
OUTP:PROT:CLE
Clears alarms

>top

Setup

Overview of Command

Command (function search)

Command (ABC search)

Command (Sub-system search)

Register

Appendix

Tutorial

Electronic Load  PLZ-5W seriesElectronic Load PLZ-5W series
Communication Interface Manual