Processing Time of Commands

The command processing time is the time that elapses until the next command is accepted.

It does not include the response time of the hardware.

The processing times indicated here are typical values.

They are not guaranteed.

Measurement environment

Software: Test programs written in C language; KI-VISA 5.0.8

PC: Core 2 Quad 2.4 GHz, Windows Server 2008 R2 (x64)

 

Command USB
(ms)
RS232C*1
(ms)
LAN
VXI-11*2
(ms)
LAN
HiSLIP*2
(ms)
LAN
SCPI-RAW*2
(ms)
Description
*IDN? 3.0 32.0 0.45 0.27 0.25 Queries the model name
VOLT 15.8 15.8 15.8 15.8 15.8 Sets the voltage
CURR 15.8 15.8 15.8 15.8 15.8 Sets the current
OUTP ON 10.5 13.8 10.5 10.5 10.5 Turns the output on and off
MEAS:VOLT? 16.5 30.0 16.0 15.9 15.9 Queries the measured voltage output
MEAS:CURR? 16.5 30.0 16.0 15.9 15.9 Queries the measured current output

*1:Data rate setting: 19200 bps.

*2:Gigabit Ethernet and 100BASE-TX L2 Switch (hub)