TRIG:TRAN:SOUR

Sets the condition (trigger source) for actually changing the setting after the PMX receives INIT:TRAN.

Command

TRIGger:TRANsient:SOURce {IMMediate|BUS}

TRIGger:TRANsient:SOURce?

Parameter

Value IMM The setting is changed immediately (factory default).
  BUS The setting is changed when a software trigger is received (use the *TRG or TRIG command to change the setting).

For the setting that is applied when *RST is sent, see this table.

Response

Returns the trigger source in CHAR format in response to TRIG:TRAN:SOUR?.