VOLT:PROT

Sets the overvoltage protection (OVP).

Command

[SOURce:]VOLTage:PROTection[:LEVel] {<numeric>|MINimum|MAXimum}

[SOURce:]VOLTage:PROTection[:LEVel]? [{MINimum|MAXimum}[

Parameter

Value 10 % to 110 % of the present voltage setting (The default value is 110 % of the rated output voltage).
Unit V
A SCPI error (-222, "Data out of range") occurs if outside the range.

For the setting that is applied when *RST is sent, see this table.

Response

Returns the OVP value in NR3 format in response to VOLT:PROT?.