Sets the voltage that is applied when INIT:TRAN and a software trigger are sent.
When the PWX is set so that constant voltage is controlled externally (VOLT:EXT:SOUR VOLT), settings performed by this command are invalid.
|Value||A value in the range of the VOLT:LIM:LOW setting to 105 % of the rated output voltage (the default value is 0 V)|
|A SCPI error (-222, "Data out of range") occurs if outside the range.|
For the setting that is applied when *RST or *RCL is sent, see this table.
Returns the voltage value that is applied when a trigger is received in NR3 format in response to VOLT:TRIG?.