Interface Setup

GPIB (Optional)

This interface valid only when the factory option GPIB interface board is installed.

GPIB connection

Use a standard IEEE488 cable to connect the PAT-T to the computer.

GPIB configuration

1.    Select GPIB (CF54: GPIb) in the CONFIG settings.

2.    Set the address (CF51: 1 to 30) in the CONFIG settings.

The address is set to 1 as factory default setting.

GPIB function


Function Subset Description
Source handshaking SH1 Full capability
Acceptor handshaking AH1 Full capability
Talker T6 Function available
Listener L4 Function available
Service request SR1 Full capability
Remote local RL1 Full capability
Parallel polling PP0 No capability
Device clear DC1 Full capability
Device trigger DT1 Full capability
Controller C0 No capability
Electrical interface E1 Open collector driver

Service request

Service request and serial polling functions are implemented.