This interface valid only when the factory option USB interface board is installed.
A device driver supporting USB T&M Class (USBTMC) is required to control the PAT-T through the USB interface. The USBTMC driver is automatically installed by the VISA library.
Use a standard USB cable to connect the PAT-T to the computer.
Select USB (CF54: uSb) in the CONFIG settings.
Service request and serial polling functions are implemented.
Complies with USB Specification 2.0
Complies with USBTMC Specification 1.0 and USBTMC-USB488 Specification 1.0
Data rate: 12 Mbps maximum (full speed)
VID （Vender ID）
PID （Product ID）