Kikusui Electronics Corp. :: Commnunication Interface Mannual

Command (Function)

Protection and Clear the Alarm

Overvoltage protection settings

CURR:PROT Sets the OCP.
CURR:LIM Queries the current setting limit.
CURR:LIM_AUTO Enables/Disables the current setting limit.

Overcurrent protection settings

VOLT:PROT Sets the OVP.
VOLT:LIM Queries the voltage limit setting.
VOLT:LIM_AUTO Enables/Disables the voltage limit setting.

Operation when a protection function is activated

SYST:CONF:BTR:PROT Turns breaker trip on/off when the OCP/OVP activates.
SYST:CONF:BTR:SHUT Turns the breaker trip on/off when the SD signal is applied.

Releasing the Alarm

OUTP:PROT:CLE Clears the alarm.

>top