Kikusui Electronics Corp. :: Commnunication Interface Mannual

Command (Function)

Setting Changes using triggers

Second level node: SEQuence[1] or TRANsient

The same operation is carried out regardless of the node that is used.

-> Tutorial

 

VOLT:TRIG Target voltage using a trigger.
CURR:TRIG Target current using a trigger.
TRIG:SOUR Sequence 1: Trigger source.
INIT Sequence 1: Starts the voltage/current setting trigger function.
INIT:NAME Starts the trigger function.
TRIG Sequence 1: Software trigger.
ABOR Aborts the operation of all sequences.

>top