Kikusui Electronics Corp. :: Commnunication Interface Mannual

Command (Sub-system)

SOURce subsystem

CURR Sets the current.
CURR:EXT:SOUR Sets the constant current control mode.
CURR:FINE Sets the fine adjustment setting for current (Only on the PAT350-22.8T and PAT850-9.4T).
CURR:LIM Queries the current setting limit.
CURR:LIM:AUTO Enables/Disables the current setting limit.
CURR:PROT Sets the OCP.
CURR:TRIG Target current using a trigger.
VOLT Sets the voltage.
VOLT:EXT:SOUR Sets the CV control mode setting.
VOLT:FINE Sets the fine adjustment setting for voltage. (Only on the PAT350-22.8T and PAT850-9.4T)
VOLT:LIM Queries the voltage limit setting.
VOLT:LIM:AUTO Enables/Disables the voltage limit setting.
VOLT:PROT Sets the OVP.
VOLT:TRIG Target voltage using a trigger.

>top