Kikusui Electronics Corp. :: Commnunication Interface Mannual

Command (Sub-system)

TRIGger subsystem

ABOR Aborts the operation of all sequences.
INIT:NAME Sequence 1, 2, and 3: Starts the trigger function.
INIT Sequence 1: Starts the voltage/current setting trigger function.
INIT:SEQ2 Sequence 2: Starts the output on/off delay trigger function.
INIT:SEQ3 Sequence 3: Starts the measurement trigger function.
INIT:CONT:NAME Sequence 3: Sets the auto continue mode.
INIT:CONT:SEQ3 Sequence 3: Sets the auto continue mode.
TRIG Sequence 1: Software trigger.
TRIG:SOUR Sequence 1: Trigger source.
TRIG:OUTP Sequence 2: Software trigger.
TRIG:OUTP:DEL:ON Sequence 2: Sets the output on delay.
TRIG:OUTP:DEL:OFF Sequence 2: Sets the output off delay.
TRIG:OUTP:SOUR Sequence 2: Trigger source.
TRIG:SEQ2 Sequence 2: Software trigger.
TRIG:SEQ2:DEL:ON Sequence 2: Sets the output on delay.
TRIG:SEQ2:DEL:OFF Sequence 2: Sets the output off delay.
TRIG:SEQ2:SOUR Sequence 2: Trigger source.
TRIG:ACQ Sequence 3: Software trigger.
TRIG:ACQ:SOUR Sequence 3: Trigger source.
TRIG:SEQ3 Sequence 3: Software trigger.
TRIG:SEQ3:SOUR Sequence 3: Trigger source.