Output On/Off Phase Control
The PCR-M only has output on phase control. It does not have output off phase control.
The second level nodes are SEQuence2 and SYNChronize. Regardless of which node you use, the PCR operates in the same way when it receives the commands.
The PCR-M's sequence 2 group phase is controlled by the output being turned on, not by software triggers. To stop phase control, send the TRIG:SEQ2:SOUR IMM or TRIG:SYNC:SOUR IMM command.
|Sets the output on phase control|
|Sets the phase angle of output on phase control|
|ABOR||Aborts the trigger function|