Kikusui Electronics Corp. :: Communication Interface Manual

AC Power Supply PCR-LE series

AC Power Supply PCR-LE2 series

AC Power Supply PCR-M series

Commnunication Interface Mannual


 

DISP:LVOL (PCR-LE/ PCR-LE2 only)

Switches the voltage display (between phase voltage and line voltage).

This command is valid in single-phase three-wire output or three-phase output (PCR-LE optional).

If the EX05-PCR-LE is in use (optional), this command is valid when the signal source is set to internal signal source (FUNC:SOUR INT).

Command

DISPlay:LVOLtage[:STATe] {ON|OFF|1|0}

DISPlay:LVOLtage[:STATe]?

Parameter

Value ON(1) Line voltage is displayed.
  OFF(0) Phase voltage is displayed (default).

For the setting that is applied when *RST is sent, see this table

For the setting that is applied when *RST is sent, see this table

For the setting that is applied when *RST is sent, see this table

Response

Response

Returns the voltage display in NR1 format in response to DISP:LVOL?.

Command (function search)

Command (ABC search)

Command (Sub-system search)

Register

Appendix

Tutorial

AC power supply  PCR-M seriesAC Power Supply PCR-LE series
Communication Interface Manual

AC power supply  PCR-M seriesAC Power Supply PCR-LE2 series
Communication Interface Manual

AC power supply  PCR-M seriesAC Power Supply PCR-M series
Communication Interface Manual