Kikusui Electronics Corp. :: Communication Interface Manual

AC Power Supply PCR-LE series

AC Power Supply PCR-LE2 series

AC Power Supply PCR-M series

Commnunication Interface Mannual


 

VOLT:OFFS:LINE (PCR-LE/ PCR-LE2 only)

Sets the DC line voltage.

This command is valid in DC mode (OUTP:COUP DC).

If the EX05-PCR-LE is in use (optional) and the signal source is set to external signal source (FUNC:SOUR EXT), this command is invalid.

Command

[SOURce:]VOLTage:OFFSet[IMMEediate] {<numeric>|MINimum|MAXimum}

[SOURce:]VOLTage:OFFSet[IMMediate]? [{MINimum|MAXimum}]

Parameter

Value L range: -431.0 to 431.0
H range: -862.0 to 862.0
 
A SCPI error (-222, "Data out of range") occurs if outside the range.
The default value is 0.
Unit V

For the setting that is applied when *RST is sent, see this table

For the setting that is applied when *RST is sent, see this table

For the setting that is applied when *RST is sent, see this table

Response

Response

Returns the DC line voltage setting in NR3 format in response to VOLT:OFFS:LINE?.

Command (function search)

Command (ABC search)

Command (Sub-system search)

Register

Appendix

Tutorial

AC power supply  PCR-M seriesAC Power Supply PCR-LE series
Communication Interface Manual

AC power supply  PCR-M seriesAC Power Supply PCR-LE2 series
Communication Interface Manual

AC power supply  PCR-M seriesAC Power Supply PCR-M series
Communication Interface Manual