Sets trigger wait at the specified step of the program selected by PROG.
|Value||Specifies the step number|
If IMMediate or BUS is set, it cannot be specified at the same time as other setting values.
You can specify up to 3 items in the case of TRIGIN, DIGITAL2 and MSYNc.
|Value||IMMediate||Execution the step at the internal timing of the PLZ-5W without waiting for trigger application|
|BUS||Executes the step at the timing of software trigger (*TRG) application. The trigger is applied to both trigger systems: (1) sequence and step (TRANsient) and (2) measure (ACQuire).|
|TRIGIN||Executes the step at the timing at which a signal is input to pin 9 of the EXT CONT connector of the PLZ-5W|
|DIGITAL2||Executes the step at the timing at which a signal is input to pin 13 of the EXT CONT connector of the PLZ-5W (when SYST:CONF:DIGITAL2:DIR is set to INPut)|
|MSYNc||A step is executed when a signal (ACQuire command) is received from external equipment synchronized to the PLZ-5W or when a TRIG:ACQ:MSYN synchronization command packet is received from a PC or the like.|
Returns the trigger wait setting state at the specified step in character format in response to the PROG:STEP<n>:TRIG:WAIT? query.