Sets the trigger source for clearing sequence start trigger wait states.
You can select from the available choices below.
|Value||IMMediate||Starts the sequence when the Initiate key on the PLZ-5W front panel is pressed or when INIT:TRAN:PROG is received from a PC or the like.|
|BUS||Starts execution at the timing of software trigger application by the 4882/SCPI command|
|DIGITAL2||Starts execution at the timing at which a signal is input to pin 13 of the EXT CONT connector of the PLZ-5W (when SYST:CONF:DIGITAL2:DIR is set to INPut).|
|MSYNc||Starts the sequence when an MSync key on the front panel of the synchronized PLZ-5Ws is pressed. Starts the sequence when TRIG:TRAN:MSYN is received from a PC or the like.|
Returns the source of the trigger to be applied for TRANsient in character format in response to the TRIG:TRAN:SOUR? query.