Command (Function/ Subsystem)

IEEE488.2 Common Commands

*CLS Clears all the event registers
*ESE Sets the event status enable register bits
*ESR Queries the event status register
*IDN Queries the identification string (manufacturer information)
*OPC Causes the PMX to generate the operation complete message in the event status register when all of its pending operations have finished
*OPT Queries the hardware interface board and enhanced functions that are installed.
*RST Performs a device reset; configures the PMX to a known condition independent from the usage history of the device
*SAV Stores the current settings in the memory
*SRE Sets the service request enable register bits
*STB Reads the status byte and master summary status bits
*TRG Trigger command
*TST Executes a self-test
*WAI Prevents the device from executing subsequent commands or queries until the No Operation Pending flag becomes true