Regurated DC Power Supply PWX series

Communication Interface Manual


Command (Function)

System Configuration

Output settings

OUTP:PON:STAT Output status at power-on
OUTP:PON Output status at power-on (old command)

Setting limits

CURR:LIM:AUTO Enables and disables the current setting limit
VOLT:LIM:AUTO Enables and disables the voltage setting limit

Remote control settings

SYST:COMM:LANG Sets the command language
SYST:LANG Sets the command language (old command)
SYST:COMM:EMUL Sets the emulation
SYST:LANG:EMUL Sets the emulation (old command)
SYST:ERR:TRAC Sets whether to display or hide communication errors
OUTP:PROT:WDOG Sets the communication monitoring

PWX status

SYST:CONF:BLE Turns the bleeder on and off
SYST:CONF:MAST Queries the number of units in master-slave parallel operation
SYST:CONF:MON:RANG Sets the range for voltage and current monitoring
SYST:CONF:PROT:REC Sets the method for clearing OHP, FAN, AC-FAIL, and SD alarms
SYST:CONF:STAR:PRI Sets the output-on startup state

External control settings

CURR:EXT:SOUR Sets the CC control mode setting
VOLT:EXT:SOUR Sets the CV control mode setting
Sets the CC or CV control range
OUTP:EXT Sets whether to turn the output on and off using triggers
OUTP:EXT:LOG Sets the logic used to control the turning of output on and off using an external contact

Panel display setting

DISP:BRIG Sets the panel display brightness

Master-Slave control setting

SYST:CONF:SLAV:AMM Sets the current and power display on slave units




Overview of Messages

Command (function search)

Command (ABC search)

Command (Sub-system search)




Multi channel (VMCB)

Command for DCS

Regurated DC Power SUpplyRegurated DC Power Supply PWX Series
Communication Interface Manual